Toshiba TLP-ET1U 소유자 매뉴얼 - 페이지 44

{카테고리_이름} Toshiba TLP-ET1U에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Toshiba TLP-ET1U 50 페이지. 3lcd projector

Maintenance

Lamp replacement (Continued)

Reset the lamp timer.

q Turn on the power of this unit.

The startup screen appears, followed by the replacement message screen.

w Press the MENU button.

The menu screen appears.

e Select "Lamp time reset" in the "Default setting" menu and press the OK button.

r Select "Yes" on the dialog screen, then press the OK button.

The lamp time is reset.

PRECAUTIONS

• Take Step 9 above within seven minutes after turning on the power.

• Be sure to reset the lamp time after replacing the lamp.

• The lamp may burst if you continue to use it without replacing while resetting the lamp time.

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the lamp will not come on

(see

p.45).

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang it, or scratch it.

(Dirt, jolts, scratches and the like could break the lamp.)

G Used lamps

This projector's lamps contain trace amounts of environmentally harmful inorganic mercury. Be

careful not to break used lamps, and dispose it in accordance with local regulations.