Aries Embedded MCVEVP 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} Aries Embedded MCVEVP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aries Embedded MCVEVP 20 페이지.
페이지 인쇄The following steps guide you to the correct settings of your MCVEVP.
2.1 Apply Correct Jumper Settings
Pin 1 of each header is marked with a yellow dot in the picture.
1. place jumpers on P25 and P29 to activate the UART0 interface
2. leave jumper P32 open to select eMMC boot mode for MCV
3. place jumper to connect pin 1 and pin 2 on connector JP4 to connect VCCIO3B4A to 3.3V
4. Insert the MCV SoM into the Samtec connectors on MCVEVP
CHAPTER
TWO
INTIAL OPERATION
3