Pioneer CT-F10 사용 설명서 - 페이지 6

{카테고리_이름} Pioneer CT-F10에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer CT-F10 40 페이지. Stereo cassette deck
Pioneer CT-F10에 대해서도 마찬가지입니다: 서비스 매뉴얼 (28 페이지), 추가 운영 지침 (21 페이지), 서비스 매뉴얼 (28 페이지)

페이지 인쇄

Connect the CD-tuner to the amplifier as described below. If

you also have the optional cassette deck, MD recorder or CD-

Recorder, see their accompanying instructions before

following the instructions on this page. This will make

connecting up several components easier.

When connecting or disconnecting the

system cable, make sure that the power is switched off and

the unit unplugged from the wall outlet.

Line up the plug and socket before inserting. Make sure the

plug clicks home.

• If you plan to wall-mount the CD-tuner, connect using the

other end of the system cable.

Line up the three tabs on Stand A with the holes on the

CD-tuner, then slot it into place.

• If you have the optional cassette deck, MD recorder or

CD-Recorder, connect these before attaching Stand A. (The

ribbon cable can pass under the Stand A to keep it tidy.)

Line up the plug and socket before inserting. Make sure the

plug clicks home.

• If you plan to wall-mount the CD-tuner, connect the

L-shaped end of the system cable to the amplifier.

Ferrite core (Sound tuning part)

Line up the tab on Stand B with the center hole on Stand A

and slot it into place. Stand B will slide under the two tabs on

the back of Stand A.

If you plan to wall-mount the unit, see Wall-mounting your

system on page 9.

• To remove Stand B, push the center tab, as indicated, and

slide off.

PUSH

• To remove Stand A, pull the tab, as indicated, and slide off.

PULL