Pioneer CT-F10 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Pioneer CT-F10. Pioneer CT-F10 40 stron. Stereo cassette deck
Również dla Pioneer CT-F10: Instrukcja serwisowa (28 strony), Dodatkowe instrukcje obsługi (21 strony), Instrukcja serwisowa (28 strony)

Pioneer CT-F10 Instrukcja obsługi
Connect the CD-tuner to the amplifier as described below. If
you also have the optional cassette deck, MD recorder or CD-
Recorder, see their accompanying instructions before
following the instructions on this page. This will make
connecting up several components easier.
When connecting or disconnecting the
system cable, make sure that the power is switched off and
the unit unplugged from the wall outlet.
Line up the plug and socket before inserting. Make sure the
plug clicks home.
• If you plan to wall-mount the CD-tuner, connect using the
other end of the system cable.
Line up the three tabs on Stand A with the holes on the
CD-tuner, then slot it into place.
• If you have the optional cassette deck, MD recorder or
CD-Recorder, connect these before attaching Stand A. (The
ribbon cable can pass under the Stand A to keep it tidy.)
Line up the plug and socket before inserting. Make sure the
plug clicks home.
• If you plan to wall-mount the CD-tuner, connect the
L-shaped end of the system cable to the amplifier.
Ferrite core (Sound tuning part)
Line up the tab on Stand B with the center hole on Stand A
and slot it into place. Stand B will slide under the two tabs on
the back of Stand A.
If you plan to wall-mount the unit, see Wall-mounting your
system on page 9.
• To remove Stand B, push the center tab, as indicated, and
slide off.
PUSH
• To remove Stand A, pull the tab, as indicated, and slide off.
PULL