Pioneer CT-F10 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Pioneer CT-F10. Pioneer CT-F10 40 pagina's. Stereo cassette deck
Ook voor Pioneer CT-F10: Servicehandleiding (28 pagina's), Aanvullende gebruiksaanwijzing (21 pagina's), Onderhoudshandleiding (28 pagina's)

Connect the CD-tuner to the amplifier as described below. If

you also have the optional cassette deck, MD recorder or CD-

Recorder, see their accompanying instructions before

following the instructions on this page. This will make

connecting up several components easier.

When connecting or disconnecting the

system cable, make sure that the power is switched off and

the unit unplugged from the wall outlet.

Line up the plug and socket before inserting. Make sure the

plug clicks home.

• If you plan to wall-mount the CD-tuner, connect using the

other end of the system cable.

Line up the three tabs on Stand A with the holes on the

CD-tuner, then slot it into place.

• If you have the optional cassette deck, MD recorder or

CD-Recorder, connect these before attaching Stand A. (The

ribbon cable can pass under the Stand A to keep it tidy.)

Line up the plug and socket before inserting. Make sure the

plug clicks home.

• If you plan to wall-mount the CD-tuner, connect the

L-shaped end of the system cable to the amplifier.

Ferrite core (Sound tuning part)

Line up the tab on Stand B with the center hole on Stand A

and slot it into place. Stand B will slide under the two tabs on

the back of Stand A.

If you plan to wall-mount the unit, see Wall-mounting your

system on page 9.

• To remove Stand B, push the center tab, as indicated, and

slide off.

PUSH

• To remove Stand A, pull the tab, as indicated, and slide off.

PULL