Aeotec MultiSensor 7 사용자 설명서 - 페이지 3

{카테고리_이름} Aeotec MultiSensor 7에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec MultiSensor 7 5 페이지.
Aeotec MultiSensor 7에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

1. Remove the battery cover by sliding the Unlock button LEFT, then pull the cover off.

2. Insert the microUSB of the provided USB cable into your sensor's microUSB port.

3. Insert the larger end of the USB cable into a computer or any 5V adapter which will immediately power your MultiSensor 7.

4. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button RIGHT.

For a battery powered installation (acts as a sleeping device upon initial pair):

1. Remove the battery cover by sliding the Unlock button LEFT, then pull the cover off.

2. Insert two CR123A lithium batteries orientated according to the diagram within your sensor.

Try inserting the batteries flat rather than at an angle.

Note: MultiSensor 7 can be powered by a single CR123A (doesn't matter which port), though batteries will require changing more frequently (ha

WARNING: Not compatible to rechargeable CR123A batteries (3.6V).

3. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button RIGHT.