Firenzo Fusion 설치 및 작동 지침 매뉴얼 - 페이지 12
{카테고리_이름} Firenzo Fusion에 대한 설치 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Firenzo Fusion 18 페이지.
페이지 인쇄non-combustible container for safe removal from your home and dispose of carefully. Remember
ashes can stay hot for days and may impose a fire risk.
•
Only attempt to clean or empty ashes when the appliance is off and cold.
•
There should be little reason to empty ashes from the upper chamber as they are normally
drawn or fall into the chamber below. Periodically you may have to lift the vortex cap up and
out and ensure it is not blocked and allows free air movement through the fins on the
underside. Put it back into position after cleaning, ensuring the closed face of the vortex cap
faces outwards towards the door.
•
Ash collected in the lower chamber can be removed using a small shovel and brush. Care
9. Maintenance
must be taken not to damage the refractory linings on the base and sides.
Routine Stove Maintenance
Only genuine Firenzo spares may be used in the appliance. Failure will void the warranty.
Contact your Firenzo retailer to obtain any necessary spare parts. Firenzo recommend the appliance
be checked annually as detailed below and any maintenance carried out by someone competent to
do so. The flue system, the flue duct at the rear of the appliance, and the top diverter chamber
should be checked and if necessary cleaned at least every 3 months of operation
•
Rear flue duct. The rear flue duct on the appliance has cleaning access caps top and bottom
to enable the flue gas ducts and top diverter chamber to be checked and if necessary
cleaned on a regularity basis. Firenzo recommend this be done at least every 3 months of
operation. If heavily sooted you may need to lift the flue and top casting to gain access.
Cast iron Surfaces. Each cast iron component is individually poured and cast. There are no
•
two pieces that are identical. Firenzo endeavour to check and filter any obvious
imperfections but the casting process always has discrepancies to its final finish and these
•
may be visible under close inspection. The cast surfaces of the stove are painted with high
temperature Stovebright paint. It is best maintained by simply vacuuming it with a soft brush
attachment or wiping it down with a dry, dust-free cloth when cool. The painted surface may
assume a greyish tinge over time, but the casting can easily be freshened up with high
temperature Stovebright metallic black paint.
•
Painted Surfaces. Painted surfaces are coated with Stovebright high temperature paint. To
keep clean use a clean dry cloth. Do not use abrasive cleaners/materials that may cause
scratching to the surface.
Glass windows. If the stove is used correctly, very little or no soot will be deposited on the
•
ceramic glass windows. If soot does form on the glass during the lighting process, it will burn
away once normal combustion begins in the stove. If the glass window becomes thoroughly
Version 29/8/16
P a g e
| 12