Whirlpool AKR8551IX 사용자 및 유지보수 매뉴얼 - 페이지 10

{카테고리_이름} Whirlpool AKR8551IX에 대한 사용자 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Whirlpool AKR8551IX 16 페이지.

DESCRIPTION AND USE OF HOOD

Control panel

1. OFF / Extraction speed (power) decrease button

2. ON / Extraction speed (power) increase button

Note: The intensive extraction speed (power) is timed and lasts for 5

minutes (indicator c flashes); the hood then reverts to extraction speed

(power) 2.

3. ON/OFF Timer button: delays the deactivation of the selected extraction speed (power) by 5 minutes.

Note: the button is also used for the "Filter saturation signal reset " function

4. Light ON/OFF button

5. Display, shows:

a. Extraction speed (power): the indicator rotates according to the selected extraction speed (power).

Safety operation: the indicator flashes.

b. Grease filter saturation: comes on when filter maintenance is required.

c. Timer

d. Active carbon filter saturation: comes on when filter maintenance is required.

Note: this function is normally disabled and should only be activated if he hood is used as a filter version (with carbon filter fitted).

To do so, proceed as follows:

- switch off the hood

- press and hold buttons 1 and 3 at the same time, until the indicator stops flashing (indicator disabled) and is lit steadily (indicator

enabled).

- release the buttons.

To deactivate it, repeat the procedure: the indicator will no longer be lit steadily (indicator enabled) and will flash instead (indicator

disabled).).

e. Lighting

Safety operation

The hood has a sensor which, in the event of a sudden increase in temperature, activates the appliance until the temperature drops

significantly.

Filter saturation signal reset

After carrying out filter maintenance, press and hold button 3 until indicator switched off.

1. Control panel.

2. Extraction panel.

3. Grease filters.

4. Halogen lamps.

GB10