AER Domino 2A 사용자 설명서 - 페이지 10

{카테고리_이름} AER Domino 2A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AER Domino 2A 16 페이지.
AER Domino 2A에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (20 페이지)

5.6 Insert

The insert-loop is an in-/output on a stereo-socket to link different effect-de-

vices (EQ, compressor etc.) in serial mode with tip = send (input) and ring =

return (output). This configuration allows several more applications, such as:

1. use as additional line-output

2. use as additional line-input

3. link between two or more AER-amps with insert-feature (AG8, Domino,

Compact ClassicPro)

For each of these applications you'll need the appropriate cable connection,

e.g. use as line-output: stereo-jack (tip and ring = hot, sleeve = ground) to

mono-jack.

The particular AER-link-application (s. no. 3 - link between AER-amps) is re-

presented on page 11. In link-operation it is assured, that the signals of all con-

nected amps are hearable on all devices, even with different effect settings.

You just have to be aware, that the different levels depend on each other.

This setting (in combination with active loudspeakers, pre master-function)

works as a complete and easily operated reinforcement/monitor system.