AER Domino 2A 사용자 설명서 - 페이지 8

{카테고리_이름} AER Domino 2A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AER Domino 2A 16 페이지.
AER Domino 2A에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용자 설명서 (20 페이지)

페이지 인쇄

5. Functional characteristics

5.1 Mute

The mute switch turns the appliance to mute as requi-

red. The function can also be activated by a standard

footswitch (on/off switch).

5.2 Equalization

The triple-band equalizer of your Domino

you with an active and high quality sound interaction

tool that supports the natural tone of instruments and

voice whilst simultaneously offering you the possibili-

ty of a controlled accentuation.

With all controls in mid position the filters are set to

produce a very pleasing and natural sound impression

that you can „colour up" by using the colour filter with

the effect of lowering the mids and lifting the trebles

(-3 dB at 700 Hz, +10 dB at 8kHz). The tone becomes

more open and light and is especially suited for finger-

picking techniques.

The equalization can support or soften the effect of

the colour filter and allows a differentiated mids-ac-

centuation.

A: with colour-filter (switch pressed)

reduce treble to soften possible sharpness

colour

bass

B: without colour-filter (switch not pressed)

boost treble to brighten the sound

colour

bass

Note:

The active equalization of the Domino

signal adjustment. If you spot an intensified flickering

of the clip indicator, level the signal level with the gain

control (s. 4.2 Level adjustment).

2.A

middle

treble

middle

treble

effects the

2.A

5.3 Effects

The Domino

32/24-bit-AER-effect processor, with the select-switch

you can choose between 16 diverging presets (s.

chart below).

The return-control determines the intensity of the

internal effects (left stop = no effect), the eff. send-

provides

controls level the ratio of effect and original signal

per channel.

Progr.-No. Description

Furthermore an additional effects unit (external ef-

fect) may be connected to the Domino

purpose use the send and return sockets on the rear

side of the amplifier (send goes to input, return to

the output of the external effects device). The inten-

sity of the effect is adjusted at the external effects

unit.

has a built-in (internal) digital

2.A

ambience: short

ambience: medium

ambience: long

reverb: short

reverb: medium-short

reverb: medium

reverb: long

reverb: very long

delay: 100ms

delay: 320ms short

delay: 320ms long

chorus

delay (410ms) with reverb-portion short

reverb with delay-portion (410ms) long

chorus with reverb-portion

reverb with chorus-portion

. For this

2.A