Firesense 61322 매뉴얼 - 페이지 6

{카테고리_이름} Firesense 61322에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Firesense 61322 14 페이지. Outdoor tabletop heater

ASSEMBLY

STEP 5

Insert a 60mm Stud into each of the 3

holes at the top of the Emitter Screen,

then fasten with 3 Flange Nuts from

the inside of the Emitter Screen.

STEP 7

Lower the Guard over the Emitter Screen

and insert the feet of the Guard into the

holes near the edge of the Burner.

STEP 6

Place the Emitter Screen on the Burner. Use 4

3/16" Bolts to connect the Emitter Screen to the

Burner. Tighten the Bolts.

STEP 8

Place a Washer on each of the 3 Studs.