Alcohawk AlcoHAWK Slim Ultra 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Alcohawk AlcoHAWK Slim Ultra에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alcohawk AlcoHAWK Slim Ultra 16 페이지.

Wait 20 minutes after the test subject smokes, eats or drinks

before testing. Failure to wait 20 minutes can give inaccurate BAC

readings and harm the sensor.

Step 1) Place a fitted cover over the mouthpiece each time you test

another individual.

Step 2) If it has been more than 24 hours since the device was last

used, prime the sensor by blowing into the mouthpiece for 4

to 5 seconds before turning on the device.

Step 3) PRESS the red Power On/Off button located on the front of the

unit. A single beep will sound and the device will count down

from 99 as it prepares the sensor for testing.

Note: The device will restart a count down from 10 if the sensor is not

ready within the first countdown from 99.

Step 4) WAIT until the unit displays "bL" and you hear a SINGLE

BEEP.

Note: The device will not shut off until a test is performed OR until 15

seconds of non-use elapses.

Step 5) Take a DEEP BREATH AND BLOW STEADILY (for at least

5 seconds) until a BEEP sounds to signal completion of the

testing.

OPERATION