Alcohawk AlcoHAWK Slim Ultra Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Test Equipment Alcohawk AlcoHAWK Slim Ultra. Alcohawk AlcoHAWK Slim Ultra 16 pages.

Print Page

Wait 20 minutes after the test subject smokes, eats or drinks

before testing. Failure to wait 20 minutes can give inaccurate BAC

readings and harm the sensor.

Step 1) Place a fitted cover over the mouthpiece each time you test

another individual.

Step 2) If it has been more than 24 hours since the device was last

used, prime the sensor by blowing into the mouthpiece for 4

to 5 seconds before turning on the device.

Step 3) PRESS the red Power On/Off button located on the front of the

unit. A single beep will sound and the device will count down

from 99 as it prepares the sensor for testing.

Note: The device will restart a count down from 10 if the sensor is not

ready within the first countdown from 99.

Step 4) WAIT until the unit displays "bL" and you hear a SINGLE

BEEP.

Note: The device will not shut off until a test is performed OR until 15

seconds of non-use elapses.

Step 5) Take a DEEP BREATH AND BLOW STEADILY (for at least

5 seconds) until a BEEP sounds to signal completion of the

testing.

OPERATION