Firewarm stoves FIREWARM 8 설치 및 운영 지침 매뉴얼 - 페이지 5

{카테고리_이름} Firewarm stoves FIREWARM 8에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Firewarm stoves FIREWARM 8 17 페이지. Freestanding multifuel stoves
Firewarm stoves FIREWARM 8에 대해서도 마찬가지입니다: 설치 및 운영 지침 (16 페이지), 설치 및 운영 지침 매뉴얼 (14 페이지)

페이지 인쇄

1. Fit the Flue Collar using the 4-M6 set screws and washers supplied. Screw The M6 nuts

on the M6 screws all the way to the end. Then put the washer over the screw/nut assembly

and secure the collar to the lid/back as desired.

The flue collar is shown below fixed to the top of the stove. If a back flue outlet is required

then remove the blanking plate from the back and fit the collar in its place. Refit the

blanking plate to the top of the stove.

2. To fit the Baffle:

Insert the baffle as shown below with the chamfers to the bottom. Slide the baffle up

behind the Side fins and sit it into place as shown below right. The bottom of the baffle sits

on the bottom bracket while the top of the baffle sits on the turbo bar.

Revised 11-07-11