Firewarm stoves FIREWARM 8 Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 5
Soba Firewarm stoves FIREWARM 8 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. Firewarm stoves FIREWARM 8 17 sayfaları. Freestanding multifuel stoves
Ayrıca Firewarm stoves FIREWARM 8 için: Kurulum ve İşletim Talimatları (16 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (14 sayfalar)
Sayfayı Yazdır1. Fit the Flue Collar using the 4-M6 set screws and washers supplied. Screw The M6 nuts
on the M6 screws all the way to the end. Then put the washer over the screw/nut assembly
and secure the collar to the lid/back as desired.
The flue collar is shown below fixed to the top of the stove. If a back flue outlet is required
then remove the blanking plate from the back and fit the collar in its place. Refit the
blanking plate to the top of the stove.
2. To fit the Baffle:
Insert the baffle as shown below with the chamfers to the bottom. Slide the baffle up
behind the Side fins and sit it into place as shown below right. The bottom of the baffle sits
on the bottom bracket while the top of the baffle sits on the turbo bar.
Revised 11-07-11