Firewarm stoves FIREWARM 8 Руководство по установке и эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по установке и эксплуатации для Плита Firewarm stoves FIREWARM 8. Firewarm stoves FIREWARM 8 17 страниц. Freestanding multifuel stoves
Также для Firewarm stoves FIREWARM 8: Установка и правила эксплуатации (16 страниц), Руководство по установке и эксплуатации (14 страниц)

1. Fit the Flue Collar using the 4-M6 set screws and washers supplied. Screw The M6 nuts

on the M6 screws all the way to the end. Then put the washer over the screw/nut assembly

and secure the collar to the lid/back as desired.

The flue collar is shown below fixed to the top of the stove. If a back flue outlet is required

then remove the blanking plate from the back and fit the collar in its place. Refit the

blanking plate to the top of the stove.

2. To fit the Baffle:

Insert the baffle as shown below with the chamfers to the bottom. Slide the baffle up

behind the Side fins and sit it into place as shown below right. The bottom of the baffle sits

on the bottom bracket while the top of the baffle sits on the turbo bar.

Revised 11-07-11