3Com OfficeConnect WX1200 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} 3Com OfficeConnect WX1200에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com OfficeConnect WX1200 10 페이지. Secure converged networks enterprise edition
3Com OfficeConnect WX1200에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (2 페이지), 데이터시트 (6 페이지), 제품 설명서 (15 페이지)

페이지 인쇄

OBILITY

YSTEM

OFTWARE

Example 3: Deployment Site Has DNS But No

DHCP The deployment site in this example does not

have a DHCP server but does have a local DNS server.

The configuration is similar to Example 1, but includes

DNS configuration information instead of an IP alias.

Configure a VLAN:

WX1200# set vlan 1 port 7

Configure an IP interface on the VLAN.

WX1200# set interface 1 ip 192.168.1.252

255.255.255.0

Configure a default route through the local default

router:

WX1200# set ip route default 192.168.1.1 0

Configure the default DNS domain name:

WX1200# set ip dns domain example.com

Configure DNS server information:

WX1200# set ip dns server 192.168.11.2

Enable the MSS DNS client:

WX1200# set ip dns server enable

Enable the auto-config option:

WX1200# set auto-config enable

Save the configuration changes:

WX1200# save config

Power off or restart the switch.

UICK

TART

UIDE

Example 4: Deployment Site Has DHCP But Local

DNS Domain Differs From Corporate DNS

Domain The deployment site in this example has a

DHCP server, so the switch's DHCP client is enabled.

Static IP address and default router information are

not required. The site also has a local DNS server.

However, the local DNS domain name is different

from the corporate DNS domain name where 3WXM

Services are located. The static DNS configuration on

the switch overrides the DNS configuration from the

DHCP server.