Xerox WORKCENTRE 7435 보충 설명서 - 페이지 20

{카테고리_이름} Xerox WORKCENTRE 7435에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox WORKCENTRE 7435 49 페이지. Security function
Xerox WORKCENTRE 7435에 대해서도 마찬가지입니다: 참조 매뉴얼 (28 페이지), 브로셔 및 사양 (8 페이지), 사양 (15 페이지), 평가자 매뉴얼 (32 페이지), 사양 (14 페이지), 소프트웨어 업그레이드 (2 페이지), 빠른 시작 매뉴얼 (7 페이지)

페이지 인쇄
Xerox WORKCENTRE 7435 보충 설명서

Regular Review by Audit Log

This section describes the setting and importing method for the Audit Log from the System Administrator client via
CentreWare Internet Services.
The Audit Log, regularly reviewed by the Security Administrator, often with the aid of third party analyzing tools,
helps to assess attempted security breaches, identify actual breaches, and prevent future breaches.
The important events of TOE such as device failure, configuration change, and user operation are traced and
recorded based on when and who operated what function.
Auditable events are stored with time stamps into NVRAM. When the number of stored events reaches 50, the 50
logs on NVRAM is stored into one file ("audit log file") within the internal HDD. Up to 15,000 events can be stored.
When the number of recorded events exceeds 15,000, the oldest audit log file is overwritten and a new audit event
is stored.
There is no deletion function.

Set Audit Log

1.
Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field, press
the <Enter> key.
2.
Supply the Administrator ID and Password, when prompted.
3.
Click the [Properties] tab.
4.
Click [+] on the left of the [Security] folder.
5.
Click [Audit Log].
6.
Check the [Enabled] box for [Audit Log].
7.
Click the [Apply] button.

Import the Audit Log File

The following describes methods for importing the Audit Log.
administrators and can be downloaded via CentreWare Internet Services for viewing and analysis.
data is not viewable from the local UI.
Accessing to the logged data.
1.
Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field, press
the <Enter> key.
2.
Supply the Administrator ID and Password, when prompted.
3.
Click the [Properties] tab.
4.
Click [Audit Log].
5.
Click [Export as text file].
The audit logs are only available to system
And additionally requires the enabling of SSL/TLS encryption for
20
The logged