Xerox DocuPrint N32 기술 지침 - 페이지 2
{카테고리_이름} Xerox DocuPrint N32에 대한 기술 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuPrint N32 10 페이지. Xerox docuprint n24: supplementary guide
Xerox DocuPrint N32에 대해서도 마찬가지입니다: 빠른 설치 (10 페이지), 기능 설명서 (15 페이지), 소모품 매뉴얼 (2 페이지)
페이지 인쇄
2
Photo 5
Photo 7
Photo 9
Photo 11
Photo 13
Photo 6
Photo 8
Photo 10
Photo 12
Photo 14
Xerox N24/32/40 Technical Instructions
Step 4
Using a Philips screwdriver remove the
two screws holding the drum axle hub
on the contact side of the waste hopper.
(See Photo 5).
Remove the drum axle hub. (See Photo 6)
Step 5
Rotate the waste hopper 180°. Remove
the two screws holding the drum axle
hub. (See Photos 7).
Remove the hub. (See Photos 8)
Step 6
Lift out the drum. (See Photos 9)
Step 7
Remove the PCR from the cradles.
(See Photos 10)
NOTE: Clean the PCR using a mild soap
and water.
Step 8
Carefully lift the waste hopper so it is up
on its end and the handle of the cartridge
is facing you. (See Photo 11)
NOTE: Do not flip the waste hopper so
the wiper blade is down, toner will spill
out of the hopper. Remove the screw
located just below the handle.
(See Photo 12)
Step 9
Take the waste hopper to the dump
station. Release the two clips located
on each end of the waste hopper cover.
(See Photo 13) Lift off the waste hopper
cover. (See Photo 14)