Xerox VersaLink C400 펌웨어 설치 지침 - 페이지 3
{카테고리_이름} Xerox VersaLink C400에 대한 펌웨어 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox VersaLink C400 4 페이지. Fuser
Xerox VersaLink C400에 대해서도 마찬가지입니다: 펌웨어 설치 지침 (4 페이지), 빠른 사용 설명서 (5 페이지), 설치 매뉴얼 (2 페이지), 카트리지 교체 지침 (2 페이지), 매뉴얼 (3 페이지), 빠른 사용 설명서 (5 페이지), 빠른 사용 설명서 (5 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
Enabling Upgrades
.
1
In the Embedded Web Server, click
2. Click
Software Update.
3. If the Software Update area shows Disable, click
Note:
Changing this state requires a restart.
Procedures
Select a method to upgrade the device firmware.
Method 1: Upgrade using the Embedded Web
Server
1.
At the printer control panel, print a copy of the
Configuration Report: see page 1 for instructions.
2.
In the Embedded Web Server, log in as Admin, then click
System.
3.
Software Update.
Click
4.
In the Software Update area, click
5.
Click
Install Now.
Note:
Check Now
fails, set up the proxy server. Refer to the System Administrator Guide for instructions or follow the instructions for
If
Upgrade Software Manually, below.
Method 2: Upgrade Firmware Manually
1.
At the printer control panel, print a copy of the
Configuration Report: see page 1 for instructions.
2.
At the computer, access www.xerox.com/support. Locate
and download the latest software release .zip file for your
product. Unzip the file to your desktop.
3.
Open an Internet browser window. Enter the IP Address of
the device in the Address field in the format
http://xxx.xxx.xxx.xxx
4.
Log in as Admin, then click System. The default password
is 1111.
Software Update.
5.
Click
Update from File Specified
6.
In the
7.
Browse and select the downloaded .bin file from your desktop.
Install Now.
8.
Click
System.
Enable.
Check
Now.
then press Enter.
Select.
section, click