Xerox Nuvera 100 보충 설명서 - 페이지 27

{카테고리_이름} Xerox Nuvera 100에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox Nuvera 100 48 페이지. Production system
Xerox Nuvera 100에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 기능 설명서 (34 페이지), 계획 매뉴얼 (22 페이지), 사용자 설명서 (40 페이지), 운영 매뉴얼 (34 페이지), 참조 매뉴얼 (2 페이지), 계획 매뉴얼 (20 페이지), 참조 매뉴얼 (42 페이지), 빠른 참조 (2 페이지), 설치 매뉴얼 (2 페이지), 계획 매뉴얼 (38 페이지), 계획 매뉴얼 (16 페이지), 참조 매뉴얼 (2 페이지), 사양 (2 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 힌트 및 팁 매뉴얼 (18 페이지), 시작하기 매뉴얼 (26 페이지), 시작하기 매뉴얼 (30 페이지)

Tape Client Job Submission Guide

Managing and printing jobs from the Tape Client

7. From the Printer pulldown menu in the Output Control group

box, select the EPS printer to which you are sending the job

(for instructions on setting up a printer and the Socket

Gateway, refer to the chapter "Managing the tape client" or

the online help for information on the Socket Gateway.)

8. From the Queue pulldown menu, select the queue to which

you want to send the job. The queue must be set up for

LCDS printing. (Refer to the Help screens accessed from the

Queue Manager window for instructions on setting up

queues.)

9. In the Document group box, select the initial JDL, JDE, and

form (if applicable). (Refer to "Specifying the JDL, JDE, and

form to start a job.")

10. In the Quantity field, click the arrow buttons until the desired

copy quantity is displayed.

11. In the End of Job field in Input Control group box, select the

action that the tape drive will take at the end of the job.

Figure 2-2. End of Job field on Tape Client window

•

If you do not check any fields, the tape will not rewind and

will not upload.

•

Rewind Tape will cause the tape to rewind at the end of

the job.

•

Unload Tape will cause the tape to unload at the end of

the job.

12. In the Input Control group box, click Start to begin printing.

13. While jobs are being received and printed, you can check the

Status column on the Job Manager window for the current job

status. (Refer to "Checking job status.")

2-3