Alderon Industries Check It Panel 운영, 유지보수 및 설치 매뉴얼 - 페이지 4

{카테고리_이름} Alderon Industries Check It Panel에 대한 운영, 유지보수 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alderon Industries Check It Panel 6 페이지. 1 phase simplex demand dose

페이지 인쇄

Check It Panel

1 Phase Simplex Demand Dose

Operation, Maintenance & Installation Manual

Check It Panel Self Diagnosing Instructions:

#1. Check the incoming power on the top of the command center.

#2. View the current status of your system. The indicator lights are illuminated as each ﬂoat rises

#1.

All three ﬂoats are not activated. Only the Control

Power and Alarm Power indicator lights should be

illuminated.

#3.

The Stop ﬂoat and the Start ﬂoat are activated so the

Stop ﬂoat and the Start ﬂoat indicator lights are

illuminated.

Fuses are good.

If one or both of the indicators are

not illuminated the fuse or fuses

need to be replaced. If the fuse or

fuses do not ﬁx the problem the

incoming power needs to be

examined.

Alarm Float

Start Float

Stop Float

Alarm Float

Start Float

Stop Float

If the indicator lights are illuminated the fuses are good.

Alarm Fuse needs

to be replaced

with the liquid level in the tank.

Alarm Float

Start Float

Stop Float

If the Stop ﬂoat is activated the Stop light will illuminate.

Alarm Float

Start Float

Stop Float

All ﬂoats are up so all indicators are illuminated.

Control Fuse needs

to be replaced

#2.

#4.

P/N L1153

Page 4 of 6