Yamaha DM 2000 Version 2 소유자 매뉴얼 - 페이지 20

{카테고리_이름} Yamaha DM 2000 Version 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DM 2000 Version 2 37 페이지. Version 2
Yamaha DM 2000 Version 2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (44 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (22 페이지), 소프트웨어 설치 매뉴얼 (13 페이지), 소유자 매뉴얼 (1 페이지), 보충 설명서 (4 페이지), 설정 매뉴얼 (35 페이지), 오리엔테이션 매뉴얼 (8 페이지), 이중화 매뉴얼 (8 페이지), 소유자 매뉴얼 (3 페이지), (독일어) 운영 체제 설치 매뉴얼 (13 페이지)

Chapter 3—Selected Channel Window

Matrix Send level section

This section contains the balance control, AUTO, SOLO, and ON buttons and the channel

fader for the currently selected Matrix Send.

STEREO section

This section contains the Stereo Out-to-Matrix Send controls for the currently selected

Matrix Send. The rotary controls are used to set the Stereo Out-to-Matrix Send level and

pan.

COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected

Matrix Send. Its layout is identical to the COMPRESSOR section for Input Channels except

there is no LINK button. See "COMPRESSOR section" on page 11 for more information.

INSERT section

This section contains the Insert parameters for the currently selected Matrix Send. The

INSERT button turns the Insert on and off. The OUT and IN parameters are used to specify

the insert out destination and insert in source respectively. The POSITION parameter is

used to specify the position of the Insert in the signal path.

FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the currently selected Matrix

Send. Use the FADER GROUP buttons to add the channel to Fader groups, and use the

MUTE GROUP buttons to add it to Mute groups.

Studio Manager for DM2000 V1.1—Owner's Manual