Yamaha DM 2000 Version 2 소유자 매뉴얼 - 페이지 22

{카테고리_이름} Yamaha DM 2000 Version 2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Yamaha DM 2000 Version 2 37 페이지. Version 2
Yamaha DM 2000 Version 2에 대해서도 마찬가지입니다: 소유자 매뉴얼 (44 페이지), 설치 매뉴얼 (28 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (22 페이지), 소프트웨어 설치 매뉴얼 (13 페이지), 소유자 매뉴얼 (1 페이지), 보충 설명서 (4 페이지), 설정 매뉴얼 (35 페이지), 오리엔테이션 매뉴얼 (8 페이지), 이중화 매뉴얼 (8 페이지), 소유자 매뉴얼 (3 페이지), (독일어) 운영 체제 설치 매뉴얼 (13 페이지)

Chapter 3—Selected Channel Window

INSERT section

This section contains the Insert parameters for the Stereo Out. The INSERT button turns

the Insert on and off. The OUT and IN parameters are used to specify the insert out desti-

nation and insert in source respectively. The POSITION parameter is used to specify the

position of the Insert in the signal path.

FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the Stereo Out. Use the

FADER GROUP buttons to add the Stereo Out to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

Remote Channels

This is the Selected Channel window for the

Remote Channels.

CHANNEL SELECT section

Channels can be selected by clicking the

Channel ID and choosing from the list that

appears, or by clicking the left and right

Channel Select buttons. The long channel

name is displayed below the Channel ID.

Remote Channel Level section

This section contains the ON button and the

channel fader for the currently selected

Remote Channel.

Note: When the remote target setting on the

DM2000 is set to anything other than User

Deﬁned, the ON buttons and channel faders

have no effect, and the name of the speciﬁed

target is displayed below the channel ID.

Studio Manager for DM2000 V1.1—Owner's Manual