ABB AutoLink 지침서 - 페이지 6

{카테고리_이름} ABB AutoLink에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABB AutoLink 12 페이지. 15kv, 27kv, 38kv
ABB AutoLink에 대해서도 마찬가지입니다: 설치 지침 (11 페이지)

TEHI95094 – Rev. 2

6/ 12

6.3 Initial Setting or Previous Setting Modification Instructions

Remove the top cap (Fig. 1 A) using a 34mm fork spanner holding the tube with the hand

(Fig. 1 B). Check condition of O-ring (Fig. 2 E), and replace it if necessary, applying grease

on it.

Set the dip-switches to calibrate the current (Fig. 2 C, 4 switches) and set counting

operations (Fig. 2 D, 2 switches) using a small screwdriver according to table 1 settings.

Note: handle with care without damaging the switches. Settings must be made in a clean

and dry environment.