Caliber 13576 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Caliber 13576에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caliber 13576 8 페이지. Sled wheels
Caliber 13576에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (10 페이지)

6. Slide the Saddle/Latch assemblies (5) over the Telescoping Handles (9) with the latch side first. Slip a ¼" square

nut (14) into the Telescoping Handle T-slot, and secure with a ¼-20 x 1.5" screw (11), and a safety pin/lanyard

assembly (21), using the lanyard loop as a washer. The saddle/latch should be about 1" from the ski stop, and will

be adjusted later. Leave the safety pin out of its hole in the latch.

7. Place a ¼" square nut in the T-slot of the T-Handle and then slide a Telescoping handle onto the T-handle, lining

up the nut with the hole in the Telescoping Handle. Secure the handle about 6" extended with a ¼-20 x 0.5"

screw (12) and ¼" washer (15). The extension will be adjusted to the ski later.

- Page 4 -

CI05067, rev B