Clarke 7640130 운영 및 유지보수 지침 매뉴얼 - 페이지 2

{카테고리_이름} Clarke 7640130에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 7640130 20 페이지. Pressurised sandblaster

INTRODUCTION

Thank you for purchasing this Clarke Pressurised Sandblaster.

Before you try to use this product, read this manual and follow the instructions

carefully. In doing so you will ensure your safety and the safety of others

around you. You can also look forward to a purchase that gives you long and

satisfactory service.

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Please be aware that certain parts of this sandblaster will wear, and require

replacing and that these parts may not be covered by your guarantee.

The speed at which certain parts wear depends on the abrasiveness of the

materials used. Replacement parts are available from your nearest Clarke

International dealer.

• 1 x Abrasive Tank Assembly

• 2 x Handlebars (with screws, washers and nuts)

• 2 x Wheels and Accessories

• 1 x Wheel Axle

• 1 x Sand Hose

• 1 x Funnel

• 1 x Hood

• 4 x Nozzle (2mm, 2.5mm, 3mm and 3.5mm)

• 1 x Instruction Manual