Zanussi ZHC 95 ALU 지침 책자 - 페이지 18

{카테고리_이름} Zanussi ZHC 95 ALU에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC 95 ALU 20 페이지. Cooker hood
Zanussi ZHC 95 ALU에 대해서도 마찬가지입니다: 지침 책자 (20 페이지), 지침 책자 (18 페이지)

페이지 인쇄

Ducting or re-circulation fitting

Ducting fitting.

This is possible for all forms of installation:

a) Connect the air outlet to the external ducting system.

b) Remove the activated charcoal filter (if there is one)inside the hood canopy

(see Maintenance).

Re-circulation fitting

This is only possible with the air outlet directed upwards. Fit the venting grille G

onto the air outlet.The activated charcoal filter should be fitted inside the hood

canopy after connection to the power supply.

Connection to power supply and checking of good working

order

1 - It is absolutely necessary to follow the warnings 3.2,3.3 and 3.4 of paragraph 3,

concerning safety measures.

2 - Loosen the two locking screws and remove the metal cover.

Connect the hood connection to the engine connection (a).Correctly place the

connectors under the cover and tighten the two locking screws (b).

3 - Once electrical connection has been carried out, check that lights, engine and

change of speed work.

4 - Fit the lower grill and the activated carbon filter (only for filter mode)(see Maintenance).

INSTALLATION INSTRUCTIONS

S36_26

S36_27