Zanussi ZHI 623 설치, 사용 및 유지보수 핸드북 - 페이지 6

{카테고리_이름} Zanussi ZHI 623에 대한 설치, 사용 및 유지보수 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHI 623 15 페이지.
Zanussi ZHI 623에 대해서도 마찬가지입니다: 설치, 사용 및 유지보수 핸드북 (16 페이지)

페이지 인쇄

- Each filter is supplied with installation instructions.

Panelwork

Use lukewarm water only, to which a non-aggressive cleaning liquid is added. Do

not use abrasive or aggressive products, or products containing alcohol.

Lighting

- Lighting is provided by two 40 W bulbs.

- To replace them, remove the grease filters

as described in the "Grease filter" section

(fig. 4) to gain access to the bulbs.

- Replace the defective bulb or bulbs with

identical models and replace the grease

filters.

FOR THE INSTALLER

INSTALLATION

- The hood must always be fitted above the center of the cooker hob.

- The minimum distance between the top of the cooker hob and the bottom of the

hood shall be 650 mm.

- If your cooking appliance has a cover, check that it can be lifted without hindrance.

Assembly

- All accessories necessary for installation are supplied with the appliance.

- Use the template to position the support lug wall attachment holes and drill the holes

for the plugs (top edge of the hood aligned with the top of adjacent furniture).

- Attach the support lugs with appropiate screws.

Hood preparation

- Before starting wall mounting, the depth of the hood has to be adjusted to match the

depth of adjacent furniture.

- The hood depth can be adjusted between 27 and 36 cm.

Depth adjustment:

1 - Measure the body depth of the furniture between which the hood is to be installed.