Zanussi ZHI 623 설치, 사용 및 유지보수 핸드북 - 페이지 8

{카테고리_이름} Zanussi ZHI 623에 대한 설치, 사용 및 유지보수 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHI 623 15 페이지.
Zanussi ZHI 623에 대해서도 마찬가지입니다: 설치, 사용 및 유지보수 핸드북 (16 페이지)

페이지 인쇄

Installing the evacuation duct

- Depending on the choice of evacuation ducts, install the 100 or 120 mm Ø duct

which attaches to the rear box by a bayonet system.

Connection

There is an adjustment lever inside the hood

(fig. 8) for selecting "evacuation" or

"recycling" (accessible after removing the

grease filters).

- Lever down - recycling (air outlet by front

upper louvers).

- Lever up - evacuation (outlet through rear

duct). These positions must be respected in

accordance with the selected use.

Connection to an individual or collective duct

- Connect the hood to an individual or collective duct (unused flue) using pipes and

connection pieces made of uninflammable material.

- When the evacuation version hood is used, it must not hinder existing ventilation or

extraction, and must be in accordance with Unified Technical Document

DTU n° 61-1.

- Connection fittings must be made in accordance with standard practice and respect

safety conditions, and under no circumstances shall the evacuation duct discharge

into the attic.

- Flues used as smoke ducts shall not be used.