Clarke CRS350M 운영 및 유지보수 지침 매뉴얼 - 페이지 7

{카테고리_이름} Clarke CRS350M에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CRS350M 13 페이지. Mini reciprocating saw

FITTING THE BLADE

WARNING: BEFORE REMOVING, OR INSTALLING A BLADE, MAKE SURE

THAT THE MAINS PLUG HAS BEEN REMOVED FROM THE MAINS SUPPLY.

1. Twist and hold the Blade holder

open.

2. Insert the blade as far as possible

into the holder with the blade

teeth facing downwards.

3. Release the blade holder to lock

the blade in place.

• Check that the blade is secure

before use.

CAUTION: THE RETRACTED BLADE LENGTH SHOULD BE LONGER THAN THE

WIDTH OF THE WORKPIECE. IF THE BLADE IS SHORTER, THE TIP WILL JAM IN

THE WORKPIECE DURING CUTTING, POSSIBLY CAUSING INJURY AND

DAMAGING THE BLADE OR WORKPIECE.

OPERATION

TO SWITCH ON THE SAW

1. Squeeze the trigger.

• The saw will start.

• The speed can be increased by

increasing the pressure on the

trigger.

TRIGGER LOCK FEATURE.

For continuous cutting at full speed,

squeeze the trigger fully and then

press and release the Lock ON

button, then release the Trigger.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]