Clarke CDTJ12 운영 및 유지보수 지침 매뉴얼 - 페이지 11

{카테고리_이름} Clarke CDTJ12에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CDTJ12 12 페이지. Dovetail jig

TROUBLESHOOTING

Your CLARKE product has been designed to give long and trouble free

service. If, however, having followed the instructions in this booklet carefully,

you still encounter problems, the following points should help identify and

resolve them.

PROBLEM

Pins are too loose

Pins are too tight

Pins stand proud of the joint

Pins sit too deep in the joint

Pieces do not line up

If you have any problems which cannot be resolved by reference to the above, or if you

require spare parts for your jig please contact your local Clarke dealer.

RECOMMENDED ROUTER

We recommend you use a Clarke CR1C Router available from your local Clarke

dealer.

Model Number CR1C

• 1200W, 230V motor

• Height Adjustable

• Max plunge depth 50mm

• No load speed 13700-30000 RPM

• Collet sizes 6.35mm and 8mm

• Parallel Fence

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SOLUTION

Increase the cutter depth by 0.5 mm.

Decrease the cutter depth by 0.5 mm.

Move the back stop further backwards.

Move the back stop further forward.

Adjust the horizontal/vertical stops