Clarke CDTJ12 Руководство по эксплуатации и техническому обслуживанию - Страница 11
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Инструменты Clarke CDTJ12. Clarke CDTJ12 12 страниц. Dovetail jig
Печатать страницу
TROUBLESHOOTING
Your CLARKE product has been designed to give long and trouble free
service. If, however, having followed the instructions in this booklet carefully,
you still encounter problems, the following points should help identify and
resolve them.
PROBLEM
Pins are too loose
Pins are too tight
Pins stand proud of the joint
Pins sit too deep in the joint
Pieces do not line up
If you have any problems which cannot be resolved by reference to the above, or if you
require spare parts for your jig please contact your local Clarke dealer.
RECOMMENDED ROUTER
We recommend you use a Clarke CR1C Router available from your local Clarke
dealer.
Model Number CR1C
• 1200W, 230V motor
• Height Adjustable
• Max plunge depth 50mm
• No load speed 13700-30000 RPM
• Collet sizes 6.35mm and 8mm
• Parallel Fence
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SOLUTION
Increase the cutter depth by 0.5 mm.
Decrease the cutter depth by 0.5 mm.
Move the back stop further backwards.
Move the back stop further forward.
Adjust the horizontal/vertical stops
11