Clarke CDTJ12 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 11

Araçlar Clarke CDTJ12 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CDTJ12 12 sayfaları. Dovetail jig

TROUBLESHOOTING

Your CLARKE product has been designed to give long and trouble free

service. If, however, having followed the instructions in this booklet carefully,

you still encounter problems, the following points should help identify and

resolve them.

PROBLEM

Pins are too loose

Pins are too tight

Pins stand proud of the joint

Pins sit too deep in the joint

Pieces do not line up

If you have any problems which cannot be resolved by reference to the above, or if you

require spare parts for your jig please contact your local Clarke dealer.

RECOMMENDED ROUTER

We recommend you use a Clarke CR1C Router available from your local Clarke

dealer.

Model Number CR1C

• 1200W, 230V motor

• Height Adjustable

• Max plunge depth 50mm

• No load speed 13700-30000 RPM

• Collet sizes 6.35mm and 8mm

• Parallel Fence

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SOLUTION

Increase the cutter depth by 0.5 mm.

Decrease the cutter depth by 0.5 mm.

Move the back stop further backwards.

Move the back stop further forward.

Adjust the horizontal/vertical stops