Lenovo SE350 구성 및 설치 매뉴얼

{카테고리_이름} Lenovo SE350에 대한 구성 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo SE350 24 페이지. Toolless friction rail v2
Lenovo SE350에 대해서도 마찬가지입니다: 빠른 시작 (2 페이지), 매뉴얼 (12 페이지), 매뉴얼 (8 페이지)

페이지 인쇄
Lenovo SE350 구성 및 설치 매뉴얼
Configuration Installation Guide
Bookshelf Configuration
This document provides important information for installing and removing the bookshelf configuration.
Install the bookshelf configuration
To install the bookshelf configuration, complete the following steps.
Note: Reserve 500 mm empty space in front of the node so that you can have sufficient space to install and remove the node.
1.
If you would like to stack your nodes, complete the following steps.
Hook the six T-pins into place and slide the node sleeve backward.
Fasten the thumbscrew.
Repeat step
and step
Note: Bookshelf supports up to three node stacks.
2.
Align the right bookshelf with the node sleeve and slightly push the bookshelf leftward to hook the six T-pins into place; then,
fasten the two screws.
to stack your node sleeves.
1