Cub Cadet Domestic Series 7000 서비스 매뉴얼 - 페이지 10

{카테고리_이름} Cub Cadet Domestic Series 7000에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cub Cadet Domestic Series 7000 13 페이지. Compact tractor
Cub Cadet Domestic Series 7000에 대해서도 마찬가지입니다: 서비스 매뉴얼 (4 페이지)

페이지 인쇄

7000 High / Low Shift Kit

4.21. Once it is confirmed that positive detent is

achieved, hold the shift handle in the Low posi-

tion, and check the adjustment of the connecting

rod. Lengthen or shorten the rod as necessary to

coordinate the position of the shift handle with

the transmission engagement in Low range.

See Figure 4.23.

1/4" gap

Figure 4.21

NOTE: There should be a 1/4" gap between the

back of the gear selector lever and the end of

the slot in the fender console.

NOTE: Low position is the most adjustment-criti-

cal of the three. If it is adjusted correctly, Neutral

and High range will be adjusted correctly as well.

4.22. When adjustment is correct, remove the con-

necting rod from the tractor without disturbing

the adjustment. Secure the clevis in a bench

vise, and lock-in the adjustment by tightening the

jam nut.

4.23. Install the connecting rod in the tractor, and

secure it with the new hairpin clips provided in

the kit. See Figure 4.23.

Figure 4.23