Discount Car Stereo A2DIY-CR12 빠른 시작 설치 매뉴얼 - 페이지 4
{카테고리_이름} Discount Car Stereo A2DIY-CR12에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Discount Car Stereo A2DIY-CR12 6 페이지. For porsche cr-1& cr-2 radios
페이지 인쇄Insert 3 ft. USB male terminal through ¾" hole created in
2.
step 1 and connect Module (See Fig. 9)
Fig. 8
USB cable with bracket
Fig. 9
Module inputs ports (shown with optional USB)
Push USB head (See Fig. 10) until it snaps in place and flush
3.
with mounting surface (See Fig. 11)
Fig. 10
USB head
Flush mounted to dash
Tuck and secure any extra wire from moving parts and test
4.
operation (See Enabling the AUX section below)
A.
USB with Bracket Mount
1. Locate a flat surface at location of choice within 3.2 ft. of
radio and mount USB support bracket (See Fig. 12) to
surface using adhesive/tape or screws.
mounting bracket
2.
Repeat steps 2 from "Flush to Dash or Panel" instructions.
Tuck and secure any extra wire away from moving parts and test
See Bluetooth Pairing and Connection
operation (
Fig. 11
(No drilling)
Fig. 12