3D Systems Cubify CUBEX Duo 매뉴얼 - 페이지 4

{카테고리_이름} 3D Systems Cubify CUBEX Duo에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Systems Cubify CUBEX Duo 10 페이지. Replacing a main board pcb
3D Systems Cubify CUBEX Duo에 대해서도 마찬가지입니다: 교체 매뉴얼 (13 페이지), 교체 매뉴얼 (17 페이지), 매뉴얼 (10 페이지)

페이지 인쇄
3D Systems Cubify CUBEX Duo 매뉴얼
Before beginning this process please ensure that the print pad is raised to the
top of the machine, all cartridges and the jet wipe have been removed from the
machine and that you have made a note of your Z height and offset settings as
these settings will not be present on the new PCB. Unplug the CubeX from
mains power.

Removing the Case and floor panel.

Using the 3mm hex driver remove the 8 case bolts (4 either side of the machine).
Unplug the CubeX screen.
4