3D Systems Cubify CUBEX Duo Manuel - Sayfa 4

3D Yazıcılar 3D Systems Cubify CUBEX Duo için çevrimiçi göz atın veya pdf Manuel indirin. 3D Systems Cubify CUBEX Duo 10 sayfaları. Replacing a main board pcb
Ayrıca 3D Systems Cubify CUBEX Duo için: Değiştirme Kılavuzu (13 sayfalar), Değiştirme Kılavuzu (17 sayfalar), Manuel (10 sayfalar)

Sayfayı Yazdır
3D Systems Cubify CUBEX Duo Manuel
Before beginning this process please ensure that the print pad is raised to the
top of the machine, all cartridges and the jet wipe have been removed from the
machine and that you have made a note of your Z height and offset settings as
these settings will not be present on the new PCB. Unplug the CubeX from
mains power.

Removing the Case and floor panel.

Using the 3mm hex driver remove the 8 case bolts (4 either side of the machine).
Unplug the CubeX screen.
4