3D Systems Cubify CUBEX Duo Manual - Page 4

Browse online or download pdf Manual for 3D Printers 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 10 pages. Replacing a main board pcb
Also for 3D Systems Cubify CUBEX Duo: Replacement Manual (13 pages), Replacement Manual (17 pages), Manual (10 pages)

Print Page
3D Systems Cubify CUBEX Duo Manual
Before beginning this process please ensure that the print pad is raised to the
top of the machine, all cartridges and the jet wipe have been removed from the
machine and that you have made a note of your Z height and offset settings as
these settings will not be present on the new PCB. Unplug the CubeX from
mains power.

Removing the Case and floor panel.

Using the 3mm hex driver remove the 8 case bolts (4 either side of the machine).
Unplug the CubeX screen.
4