CAME 319U36EN 설치 매뉴얼 - 페이지 11

{카테고리_이름} CAME 319U36EN에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAME 319U36EN 19 페이지. Control panel for 24v gearmotors

8 Settings

- END ADJ/SENS.

- AMP SENS.

- SLOWDOWN/AMP SENS

- OP TIME

- ACT

* Warning!: minimum sensitivity = maximum power

Adjusting the opening stop micro-switch.

Swing the door open until it is about30 mm from the fully-open position.

Turn the cam until the micro-switch is inserted, and lock it using the screw.

* End adjustement of amperometric sensor during travel:min/max.

* Adusts the amperometric sensitivity which controls the force developed by the motor during

movement; if the force exceeds the adjusted level, the system intervenes and inverts the direction of

travel.

* Adusts the amperometric sensitivity which controls the force developed by the motor during

movement; if the force exceeds the adjusted level, the system intervenes and inverts the direction of

travel.

Adjusts the closing strike zone.

Adjusts the waiting time when open.Once this time elapses, automatic closing is triggered.The waiting

time can be adjusted to between 2 and 120 seconds.

Cam

Micro-switch

Cam fastening

screw