Alto Professional TrueMix 600 사용자 설명서 - 페이지 14

{카테고리_이름} Alto Professional TrueMix 600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto Professional TrueMix 600 20 페이지.

(4.0) OPERATION

To set TrueMix 600 as the default playback device on your computer, follow the set

of directions below that corresponds to your computer's operating system.

Note: If you have other USB audio devices connected to your computer, which may

have identical names, you may need to try selecting each one until the TrueMix 600

is recognized.

Windows 10:

Use the included USB cable to connect the TrueMix

600 to your computer. Press the power switch to

power on TrueMix 600.

2. Press the Windows key and then type "Sound Settings"

into the search bar. Alternatively, right-click the

"speaker" icon in the taskbar and select Open Sound

Settings.

3. In the Windows Sound control panel select the Output dropdown box and select

USB Audio Codec.

4. Select the Input dropdown box and select USB

Audio Codec.

5. Close the Sound control panel.

Windows 11:

Use the included USB cable to connect the TrueMix

600 to your computer. Press the power switch to

power on TrueMix 600.

2. Press the Windows key and then type "Sound

Settings"

into

right-click the "speaker" icon in the taskbar and

select Sound Settings.

3. In the Windows Sound control panel select the Output section and select USB

Audio Codec.

4. In the Input section select USB Audio Codec.

5. Close the Sound control panel.

macOS:

Use the included USB cable to connect the TrueMix 600 to your computer. Press

the power switch to power on TrueMix 600.

2. Go to Applications > Utilities > Audio MIDI Setup.

3. In the Audio Devices window, select USB Audio Codec in the left column.

4. Right-click USB Audio Codec and select Use this device for sound input.

5. Right-click USB Audio Codec and select Use this device for sound output.

6. Quit Audio MIDI Setup.

the

bar.

Alternatively,