Alto Professional TrueMix 600 사용자 설명서 - 페이지 16
{카테고리_이름} Alto Professional TrueMix 600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alto Professional TrueMix 600 20 페이지.
페이지 인쇄
(5.0) TROUBLESHOOTING
If the mixer is not being detected by your computer:
•
Connect to a different USB port.
•
Avoid using passive (unpowered) USB hubs.
•
Try using a different USB cable.
•
Disconnect other USB devices.
•
Disable Windows sleep and screensaver when recording/streaming.
If no sound is heard from your speakers:
•
Make sure the input Gain knobs, Channel Volume knobs, and Main Out Volume
knobs are turned up.
•
Make sure microphones, external devices, and speakers are properly connected
with working, secure cables.
If the sound is distorted:
•
Try lowering the volume control of your sound source, musical instrument, or
microphone.
•
Try adjusting the channel EQ if there is too much treble or bass.
•
Turn the input Gain knobs to the left to lower the signal.
•
Adjust the overall volume of the mixer using the Main Out Volume knob.
If there is a hum when cables are connected:
•
Disconnect cables from the input jacks to see if it's a faulty cable.
•
Use balanced cabling connections whenever possible.
•
Make sure the signal cables are not placed near power cables.
•
Connect all audio equipment power cables to outlets which share a common
ground.
If there is a high-pitched whistling noise when using microphones:
•
This is probably feedback. Point the microphone away from the speaker.
If you are streaming audio and the quality is choppy:
•
Ensure you are connected to a USB 2.0 port.
•
Ensure your Wi-Fi connection is strong.
•
Try a wired Ethernet connection for lower latency, a more reliable connection,
and a stronger signal.
If there is latency when recording:
•
Ensure you are connected to a USB 2.0 port.
•
Close all other unneeded programs running on the computer.
•
Adjust the buffer size in your DAW, in increments of 64.
16