ESI ESRTP5 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} ESI ESRTP5에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ESI ESRTP5 18 페이지. Programmable room thermostat
ESI ESRTP5에 대해서도 마찬가지입니다: 사용자 지침 (20 페이지)

페이지 인쇄
ESI ESRTP5 설치 지침 매뉴얼

Menu Technical Settings (tEcH)

3.2
1. Press and hold
until the display shows tInE. Turn the
dial until display shows tEcH then press
&
together
to enter.
2. Use the dial to choose between the below, then press
to enter:-
dS: Delayed Start. Default is OFF. Use the dial to choose
between OFF (function disabled) or ON (heating on time
is delayed up to 40 minutes according to current room
temperature).
tPI: TPI. Default is OFF. Use the dial to choose between
OFF (function disabled), 3CYC (each hour has 3 heating
cycles, recommended for oil boilers) or 6CYC (each hour
has 6 heating cycles, recommended for gas boilers).
SUG: Swing. Default is 0.5. Use the dial to choose
between 0.5-2.0.
AdJ: Temperature calibration. Default is 0. Use the dial to
choose between -3.0°C-3.0°C.
noP: Number of time and temperature events. Default
is 4. Use the dial to choose between 4 or 6 time and
temperature events.
SEr: Landlord Service Interval. Default is OFF.
See section 9 to amend.
13