AltRider R117-X-1001 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} AltRider R117-X-1001에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AltRider R117-X-1001 6 페이지. Crash upper bars for bmw r 1200 gsw 2017+
페이지 인쇄3
4
Remove the two (2) fasteners just under the front edge of the beak.
6
Remove (4) total OEM M5 screws from the front sub frame (2) on
each side. Set them aside as you will not need them to complete
this installation.
//
BMW R 1200 GS W
Upper Crash Bars
Gently pull the beak forward to remove it. Note rubber grommets and other mounting
5
points for reinstallation.
7
Install the upper bracket using an M4 driver and (4) M5 x 35mm bolts and
(6) M5 washers; TAKE NOTE OF WASHER PLACEMENT BY REFERENCING THE
ABOVE DIAGRAM. Apply thread locker to the fasteners. Completely tighten
each fastener and torque to 10 nm.
//
Installation Instructions