AltRider R117-X-1001 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria motocyklowe AltRider R117-X-1001. AltRider R117-X-1001 6 stron. Crash upper bars for bmw r 1200 gsw 2017+

Drukuj stronę
3
4
Remove the two (2) fasteners just under the front edge of the beak.
6
Remove (4) total OEM M5 screws from the front sub frame (2) on
each side. Set them aside as you will not need them to complete
this installation.
//
BMW R 1200 GS W
Upper Crash Bars
Gently pull the beak forward to remove it. Note rubber grommets and other mounting
5
points for reinstallation.
7
Install the upper bracket using an M4 driver and (4) M5 x 35mm bolts and
(6) M5 washers; TAKE NOTE OF WASHER PLACEMENT BY REFERENCING THE
ABOVE DIAGRAM. Apply thread locker to the fasteners. Completely tighten
each fastener and torque to 10 nm.
//
Installation Instructions