AltRider R117-X-1001 Kurulum Talimatları Kılavuzu - Sayfa 4
Motosiklet Aksesuarları AltRider R117-X-1001 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. AltRider R117-X-1001 6 sayfaları. Crash upper bars for bmw r 1200 gsw 2017+
Sayfayı Yazdır3
4
Remove the two (2) fasteners just under the front edge of the beak.
6
Remove (4) total OEM M5 screws from the front sub frame (2) on
each side. Set them aside as you will not need them to complete
this installation.
//
BMW R 1200 GS W
Upper Crash Bars
Gently pull the beak forward to remove it. Note rubber grommets and other mounting
5
points for reinstallation.
7
Install the upper bracket using an M4 driver and (4) M5 x 35mm bolts and
(6) M5 washers; TAKE NOTE OF WASHER PLACEMENT BY REFERENCING THE
ABOVE DIAGRAM. Apply thread locker to the fasteners. Completely tighten
each fastener and torque to 10 nm.
//
Installation Instructions