Custom Crimp CC400 운영자 매뉴얼 - 페이지 7

{카테고리_이름} Custom Crimp CC400에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Custom Crimp CC400 17 페이지. Dial micrometer style adjustment
Custom Crimp CC400에 대해서도 마찬가지입니다: 운영자 매뉴얼 (18 페이지)

페이지 인쇄

CC200 / CC400

Install Intermediate Adapter Dies as shown previously making certain

that the Intermediate Adapter Die I.D. matches the Hydraulic Die O.D.

Bring the crimper head to fully opened position as shown

in photo A.

Install the Hydraulic Dies with the quick change tool as shown

in photo B.

Note: The die size stamped on the face of the die should face toward

the operator.

Align the studs of the Hydraulic Dies with the holes in the Adapter Dies

and SLOWLY close the crimper head on the die set as shown in photo C.

Bring the crimper head to a fully closed position as shown

in photo D.

Remove the quick change tool as shown in photo E.

Note: The dies may also be inserted manually with the crimper head in

the fully open position.

Proceed to the Crimping Instructions to set up the crimper for the hose

and ﬁ tting being crimped.

For Hydraulic Die removal, bring the crimper head to the fully closed

position.

Insert the quick change tool and open the crimper head releasing the

Hydraulic Dies form their spring retention holes.

General Production Hose Crimper

Custom Crimp CC400 운영자 매뉴얼 - 페이지 7

HYDRAULIC DIE INSTALLATION