Alula RE605 빠른 시작 매뉴얼

{카테고리_이름} Alula RE605에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alula RE605 2 페이지. Temperature sensor connect+ compatible
Alula RE605에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

The RE605 Temp Sensor

overheat conditions. The sensor will alarm when the

temperature trip points are reached.

Features

• Indicates freeze and overheat warnings

• Industry-leading wireless range and battery life

• Secure encrypted wireless transmissions

• 5-year warranty

Enroll

by placing the panel into wireless enrollment mode

and then sending an enrollment signal from the sensor.

Alternatively, the sensor can be enrolled by scanning

its bar code using the Connect+ Installer App or by

entering its 8-character serial number on the interactive

service provider's web portal.

Options for sending an Enrollment Signal

• Remove the battery tab, OR

• Remove the cover to trip tamper

Install

by mounting the sensor in the desired location

using two #4 or #6 screws. An optional cover-securing

screw is included. Alternatively, the sensor can also be

installed using 3M VHB tape.

Freeze or Heat alarms

temperature trip points are reached.

Temperature Trip Points

• Heat alarms when over 100°F (38°C)

• Heat restores when under 97°F (36°C)

• Freeze alarms when under 45°F (7°C)

• Freeze restores when over 48°F (9°C)

Use the panel installation guide to verify proper system setup.

RE605 Temperature Sensor

Connect+

is used to detect freeze and

are transmitted when the

Compatible

™

Mounting Screw Holes

Cover-Securing Screw Hole