Aluprof AL-RSP 01 프로그래밍 매뉴얼 - 페이지 3

{카테고리_이름} Aluprof AL-RSP 01에 대한 프로그래밍 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aluprof AL-RSP 01 6 페이지. Underplaster radio controller

페이지 인쇄

4. CHANGING THE OPERATING MODE (MOTOR / LIGHTING)

While the power supply is ON press

5x the PROG programming

button , which will be

confirmed by the LED.

5. MODE OF ROLLER MOTOR OPERATION

5.1. PROGRAMMING OF THE FIRST TRANSMITTER

By turning on power supply

Turn on the power, which will be

confirmed by

the UP-DOWN movement.

With the programming button

While the power supply is ON press

3x the PROG programming

button , which will be confirmed by

the LED.

III

With a switch

While the power supply is

ON quickly 3x press the button "UP"

or "DOWN" on the switch, which will

be confirmed by a short voltage

supply to the W1 or W2 output.

We reserve the right to any technical change.

Valid on 2022.05.23

PROGRAMMING MANUAL FOR UNDERPLASTER RADIO CONTROLLER AL-RSP 01

The LED flashes twice in

color of the current mode

and then twice in the color of

the new mode.

In the interval of two seconds

press the "P2" button twice,

which will be confirmed by the

UP-DOWN movement

In the interval of two seconds

press the "P2" button twice,

which will be confirmed by the

UP-DOWN movement

In the interval of two seconds

press the "P2" button twice,

which will be confirmed by the

UP-DOWN movement

RED COLOUR

Mode of roller shutter operation

GREEN COLOR

Mode of lightning control operation

Press "UP" button, which

will be confirmed by the UP-

DOWN movement.

Press "UP" button, which

will be confirmed by

the UP-DOWN movement.

Press "UP" button, which

will be confirmed by the UP-

DOWN movement.

The transmitter has been added.